Store

Accessories


Welcome! Browse, read and buy our popular high-speed camera accessories. Whether you are seeking accessories for your Phantom high-speed video camera or another brand, we hope you find what you need here! Don’t see what you are looking for? Contact us to let us know.

16 Input Analog Signal Acquisition Module (SAM-NI) USB

Product ID: VRI-DAQ-6361

View and analyze your sensor and support instrumentation data. The SAM is used to provide the Data Acquisition Unit with the necessary signals (READY and STROBE) to guarantee the sampled source data from an environment or from a unit under test will be synchronized with the Phantom image frames.


NI X Series devices for USB are the most advanced DAQ devices ever designed by National Instruments. They feature significant improvements in onboard timing and triggering and optimizations for use with multicore PCs. X Series devices integrate high-performance analog, digital, and counter/timer functionality into a single device, making them well-suited for a broad range of applications, from basic data logging to control and test automation.

* Max Analog Input Sampling Rate(1-Channel): up to 2 MS/s (Mega Samples per second) * Analog Outputs: 2 * Max Analog Output Update Rate: 2.86 MS/s * Digital I/O lines: 24 * Max Digital I/O Rate: 10 MHz * Triggering: Analog/Digital

NI X Series multifunction DAQ devices include the NI-STC3, an ASIC designed by NI for advanced timing, triggering, and synchronization. This technology includes: * Four counter/timers with more functionality than ever before, such as the ability to create a finite pulse train with a single counter * 100 MHz timebase for faster triggering response and more precise generation of analog and digital sample clocks * Independent analog and digital timing engines * Retriggerable measurement tasks for analog I/O, digital I/O, and counter/timers

USB X Series devices include patented NI Signal Streaming, a technology that uses message-based instructions and device-side intelligence to ensure high-speed, bidirectional data transfer over USB. With USB X Series, you can concurrently transfer analog, digital, and counter data in both directions. The total device throughput over USB is PC-dependent; on some systems, up to 32 MB/s sustained transfers are possible.

Compatible with the following software: * ANSI C/C++ * LabVIEW / LabVIEW Real-Time Module/ LabVIEW SignalExpress / LabWindows/CVI * Measurement Studio * Visual Basic * Visual Studio .NET
OS support: Windows Vista x64/x86, PharLap, Real-Time OS, Windows 7, Windows 7 64-bit & Windows XP



Strobe and Ready signals from your camera supported by: Access to Strobe and Ready signals simultaneously can be accomplished thru the following:

Miro eX Series:
VRI-2MA5012-01, CABLE, CAPTURE FOR MIRO 3 & 4: TRIG, READY, FSYNC, VIDEO, IRIG IN, STROBE 1 METER

Miro M-series:
VRI-2MA5017-01, CABLE, CAPTURE FOR MIRO M SERIES, TRIGGER, READY, IRIG-IN, IRIG-OUT, VIDEO, AUX (this is the standard capture cable included with purchase)

vX.X series:
VRI-BOB-RCU-2-MS, BREAK-OUT-BOX FOR VX.X SERIES, INCLUDES RCU PORT, SUPPORTS EXT MECHANICAL SHUTTER

vXX0 series:
VRI-BOB-RCU-2, BREAK-OUT-BOX FOR VXX10 VXX0 VXX1 & VXX2 SERIES INCLUDES RCU PORT

vXX1 & vXXX0 series:
Either a Break Out Box (includes all In/Out options) or with limited connectivity using the standard capture cable(included with the camera)
VRI-2GA5001, (std. capture cable with camera)
VRI-BOB-RCU-2, BREAK-OUT-BOX FOR VXX10 VXX0 VXX1 & VXX2 SERIES INCLUDES RCU PORT



More...
Price: $2,500.00

16GB Type 1 CompactFlash Card for Phantom Miro 1, 2, 4

Product ID: VRI-CF-16G-TYPE1

16GB Type 1 CompactFlash card for use with Phantom Miro 1, 2 or 4 cameras. Provides even more r removable non-volatile storage space. You will need to have a CompactFlash compatible card reader connected to your computer.



More...
Price: $280.00

1TB PHANTOM CINEMAG IV FOR FLEX4K & UHS-12 CAMERAS

Product ID: VRI-CMIV-1TB

1TB Phantom CineMag IV
Compatible with:  Phantom Flex4K, v1212, v1612, v2012 and v2512 cameras

More...
Price: $11,900.00

2000 mAh Battery for Miro 1,2,4 and eX series cameras

Product ID: VRI-ST-51

Replaceable Li-Poly Battery for RCU and Miro 1,2,4 and eX series cameras. Keep several spares charged and ready to use. This is higher capacity 2000 mAh battery. You should get between 45 and 55 minutes of typical use from this battery. Compatible with the Miro battery charger.



More...
Price: $115.00

220 Watt Power Supply with smaller 3-pin Fischer for vXXX, Flex HD/65

220 Watt Power Supply with smaller 3-pin Fischer connector

Compatible with:
Phantom vXX1 and vXX2 models, Flex, HD/65, Cinestation-B and X2SR
 
NOT compatible with Miro, v4/5/7/9/10, vXX0 (v12.1, v640, etc), Flex4K or vXX1X UHS models

More...
Price: $465.00

229 Tripod Head 3-Way Pan & Tilt up to 26.5lbs

The Manfrotto 229 Super Pro Head is a finely machined head, designed for greater positioning precision with smooth, certain action. It features three built-in bubble levels for horizontal and vertical control, and the oversized handles have calibrated degree indicators viewed from the operator's position for all axes. This rock-steady head locks easily and securely.

All pan heads fit any Bogen tripod, or any tripod with 3/8" thread. Pan heads screw right on and can also be locked in with the three locking screws in the center post platform of the tripod base.

Supports up to 26.5 LBS and is ideally suited to support the Miro,vXXX,vXXXX & vX.X series Phantom cameras.

Note: Tripod Legs are not included.

Overall height: 6.3 inches
Weight: 4.2lbs / 2kg
Max Weight: 26.5lb / 12kg
Pan: 360­°

 





More...
Price: $290.00

280 Watt Power Supply for Flex4K, V2511 & other VXXXX series cameras

VRI-PWR-SUPPLY-280W-VXX1X
280 watt power supply compatible with the Phantom Flex4K, and UHS VXX1X models (v1610, v2512, etc)

NOT compatible with Miro, Flex2K or other v-Series

280 watt; 100-240VAC;  24VDC; 11.67 AMP

Includes 3 pieces:
Power supply unit with XLR connector
XLR cable with Fischer connector end
Regional power cable (please specify)



More...
Price: $475.00

2TB PHANTOM CINEMAG IV FOR FLEX4K & UHS-12 CAMERAS

Product ID: VRI-CMIV-2TB

2TB Phantom CineMag IV
Compatible with:  Phantom Flex4K, v1212, v1612, v2012 and v2512 cameras

More...
Price: $15,900.00

30' Cable Assembly for VRI-VIC-200770 and VRI-VIC-200740

Product ID: VRI-VIC-200783

30' Cable Assembly for VRI-VIC-200770 AND VRI-VIC-200740

More...
Price: $525.00

Product Search

Hotcakes Mini Cart

Cart Total: 0 Total: $0.00
Find us:
© Copyright 1999-2016 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.866.450.7426