Phantom Camera Products

Phantom Miro Airborne

Compact. Lightweight. Rugged. An airborne-ready camera from Vision Research

  • 1,265 frames-per-second at 800 x 600 resolution
  • Superb light-sensitivity
  • Secure storage to CompactFlash
  • Rugged, High-g rated
  • Remote control and remote triggering
  • Electronic shutter to 2 µsec

Phantom Miro Airborne

This camera has been discontinued

The Miro Airborne is the best of our popular Miro 3 and Miro eX4 cameras combined into a single unit ideal for airborne applications. Get the ruggedness and form factor of the Miro 3 with the secure, removable image storage of the Miro eX4.

The Phantom Miro Airborne’s custom-designed CMOS active-pixel sensor has an ISO 12232 rating of 4800 (monochrome) ensuring the light-sensitivity required in high-speed imaging applications. And, it comes in color or monochrome versions. With access to all 12 bits of gray scale information, you can bring out the detail in shadows that result from uncontrollable and constantly changing lighting situations.

Configured for and tested to airborne application requirements the Miro Airborne could be just what you need.

What's in the Box...

  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started Guide

 

 

 

Resolution
FPS

Common resolutions and frame-rates, other resolutions available

Short Description
  • A Miro camera, specifically designed for Airborne applications
  • Featuring 800 x 600 adjustable up to 1,265 fps (512 x 512 at 2252 fps)
Throughput/Speed
  • Max speed at full resolution of 800 x 600 is 1265 fps to RAM
  • Max speed at reduced resolution of 32 x 16 is 111,110 fps
Sensor Specifications
  • CMOS sensor
  • 800 x 600 pixels
  • 22 micron pixel size
  • 12-bit depth
  • ISO 4800 mono, 1200 color
  • CAR in 128 x 8 pixel increments
  • Fill factor: 65%
  • Dynamic range: 60 dB
  • Read out noise at 45°C (typical): 21e-
  • Full well capacity (typical): 22000e-
Exposure
  • Minimum exposure time is 2 µs
  • Global electronic shutter
Memory
  • 4 GB high-speed internal RAM
  • Removable CompactFlash™
Record Times
  • 1.86 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
Special Features
  • Segment memory for up to 4 cines
  • Continuous recording
  • Frame rate profile
  • Memory gate
  • Frame timestamp
  • IRIG in/out
  • High-G rated
  • Secondary IP address
  • Field-based firmware upgrade capable
  • Camera mounting via Three 1/4-20 holes on top and bottom
  • EDR
  • Auto Exposure
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Hardware trigger (TTL or +28VDC, selectable)
  • Trigger from software
Timing & Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • Ready output
  • Strobe output
Signaling
  • Trigger (TTL or +28VDC)
  • Aux (IRIG-out or Strobe)
  • Ready
  • Fsync
  • IRIG-in
  • Video (NTSC/PAL)
Ethernet Connection
  • 10/100 Ethernet for both control and data
Camera Control
  • Phantom Camera
  • Control software (PCC)
  • SDK available
Video Out
  • NTSC or PAL
Lensing
  • 1" C-mount, C- to F-mount adapter for using F-mount lenses is included
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorith
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • 15-28 VDC, 12W
Mechanical Specifications
  • 4.5 x 2.6 x 3.2 in (L, W, H),
  • 11.4 x 6.6 x 8.1 cm without lens;
  • Weight: 2.5 lbs, 1.14 kg, without lens
Environmental Specifications
  • Operating Temp is -30°c to 50°c; Mil-Std-810G Method 502.5, Proc III
  • Storage temp is -50°c to 70°c; Mil-Std-810G Method 502.5, Proc I
  • Mil-Std-810G Method 501.5, Proc I
  • Humidity 95% non-condensing: Mil-Std-810G Method 507.5 Proc I, II
  • Operating altitude is Sea level to 40,000 feet; Mil-Std-810G Method 500.0 Proc III
  • Non-operating altitude is -500 to 50,000 feet; Mil-Std-810G Method 500.0; Proc III
  • The random vibration is Functional: 0.20g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Endurance: 0.83g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Mil-Std-810G Method 514.6, Proc I
  • Acceleration is 6g for 1 minute on all axes;
  • Shock: 40g, 10ms all 3 axes, saw tooth
  • RTCA/DO-160E Section 7.3.3 Crash Safety Sustained
  • Acoustic (susceptibility) is 150 dBA operational, 170 dBA storage
  • Magnetic Field Immunity is 500 A/m; Mil-Std-1399-70-1
  • Finish - Orange Safety Color; Powder Coat/Laser marked
  • ESD - 8 kV air discharge; IEC 61000-4-2
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started Guide
Options
  • 12-bit depth
Popular Accessories
  • CompactFlash
© Copyright 1999-2016 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.866.450.7426