Phantom Camera Products

Phantom Miro 3

Introducing the first member of the Phantom Miro family of high-speed digital cameras

  • Hi-G rated
  • Great for crash test or other harsh environments
  • 800 x 600 at 1,200 fps

Phantom Miro 3

This camera has been discontinued

 

The Phantom Miro 3, is optimized for applications such as Hydraulically Controlled, Gas Energized (HYGE) crash simulations used in the automotive industry.

Rated to survive 100g acceleration, this rugged camera can take 800 x 600 pixel images at up to 1,200 frames-per-second (or 2,252 fps at 512 x 512). Reduce the resolution to 32 x 16 and achieve frame rates greater than 111,100 fps. With an ISO rating of 4800 (monochrome, saturation-based ISO 12232), the camera has the light sensitivity for the most demanding applications.

With shutter speeds as low as 2 microseconds, the user can freeze objects in motion, eliminate blur, and bring out the image detail needed for successful motion analysis. 

What's in the Box...

  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started guide

 

 

Resolution
FPS

Common resolutions and frame-rates, other resolutions available

Short Description
  • This rugged High-G camera is designed to go places most cameras fear to tread.
Throughput/Speed
  • Max speed at full resolution of 800 x 600 is 1200 fps to RAM
  • Max speed at reduced resolution of 32 x 16 is 111,111 fps to RAM
Sensor Specifications
  • CMOS sensor
  • 800 x 600 Pixels
  • 22 µm pixel size
  • 12-bit depth
  • Active sensor dimensions are 17.6 mm x 13.2 mm
  • ISO is 4800 mono, 1200 color
  • CAR in 32 x 8 pixel increments
  • Fill factor: 65%
  • Dynamic range: 60 dB
  • Read out noise at 45°C (typical): 21e-
  • Full well capacity (typical): 22000e-
Exposure
  • Minimum exposure time is 2 µs
  • Global electronic shutter
Memory
  • 2 GB or 4 GB high-speed internal RAM
  • 2 GB, 4 GB, 8 GB internal flash memory
Record Times
  • 1.86 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
Special Features
  • Segment memory for up to 4 cines
  • Continuous recording
  • Frame rate profile
  • Memory gate
  • Frame timestamp
  • IRIG in/out (modulated and unmodulated)
  • High-G rated
  • Secondary IP address
  • Field-based firmware upgrade capable
  • Camera mounting via three 1/4-20 holes on top and bottom
  • EDR
  • Auto Exposure
Triggering
  • Programmable trigger location (pre/post trigger recording)
  • Hardware trigger
Timing & Synchronization
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • Ready output
  • Strobe output
Signaling
  • Aux (IRIG-out or Strobe)
  • IRIG-in
  • Ready
  • F-Sync
  • NTSC & PAL video
Ethernet Connection
  • 10/100 Ethernet for both control and data
Camera Control
  • Phantom Camera Control software (PCC)
  • SDK available
Video Out
  • NTSC or PAL
Lensing
  • 1" C-mount, C- to F-mount adapter for using F-mount lenses is included
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorith
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power
  • 15-28 VDC, 12W
  • DC Power battery Internal Lipolymer, 11.1V
Mechanical Specifications
  • 3 x 3.75 x 3 in (L, W, H)
  • 7 x 9.5 x 7 cm (L, W, H)
  • Weight: 2.5 lbs, 1.14 kg
Environmental Specifications
  • Operating Temp is 0°c to 50°c; Mil-Std-810G Method 502.5, Proc III
  • Storage temp is -50°c to 70°c; Mil-Std-810G Method 502.5, Proc I
  • Mil-Std-810G Method 501.5, Proc I
  • Humidity 95% non-condensing: Mil-Std-810G Method 507.5 Proc I, II
  • The random vibration is Functional: 0.20g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Endurance: 0.83g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Mil-Std-810G Method 514.6, Proc I
  • Acceleration is 6g for 1 minute on all axes;
  • Shock: 100g, 10ms all 3 axes, saw tooth
  • RTCA/DO-160E Section 7.3.3 Crash Safety Sustained
  • Acoustic (susceptibility) is 150 dBA operational, 170 dBA storage
  • Magnetic Field Immunity is 500 A/m; Mil-Std-1399-70-1
  • Finish - Black Powder Coat/Laser marked
  • ESD - 8 kV air discharge; IEC 61000-4-2
APIs
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started guide
Options
Popular Accessories
© Copyright 1999-2016 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.866.450.7426